Care guide

How to clean a copper beer tower

A solid copper and brass column needs no special chemistry – water and a soft cloth are enough. Here is the routine we give to every bar, plus how to keep it shiny or let it develop an even patina.

Polished copper bridge beer tower with brass rings

Every day: 30 seconds after closing

  1. Wipe the column with a damp microfibre cloth. This removes beer drips and condensation before they dry.
  2. Dry it with a second cloth. Water spots, not beer, are what dulls copper over time.

That is all. No cleaning chemicals are needed for daily care.

Every 2–4 weeks: polishing (optional)

  1. Put a little copper and brass polishing cream (for example Poliboy Messing Kupfer Pflege) on a soft microfibre cloth.
  2. Polish the column along the direction of the grinding marks, never in circles across them.
  3. Buff off with a clean cloth. The cream leaves a very thin protective film, so beer and fingerprints stick less until the next polish.

Prefer a patina?

Skip the polishing cream and clean the column with water only. Over time the copper will darken into an even, warm patina that suits industrial and loft interiors.

A new column is freshly ground. During the first weeks avoid touching it with bare hands more than necessary – fingerprints are where the patina starts, and it will come out more evenly without them.

What never to do

Do not scrub. Steel wool, scouring pads and abrasive sponges scratch the soft metal.
No aggressive chemicals. Descalers, acids, chlorine and grill cleaners leave black stains on copper and brass.

Good to know

Darkening is normalCopper and brass darken with time. It is a natural process, not a material defect.
Solid metalThe column has no galvanic “copper plating”, so nothing can flake or chip off.
RestorationAfter years of service or deeper damage we can refurbish the column: grinding, polishing and new lines and taps.

Cleaning the taps and beer lines

This guide covers the outside of the tower. Taps, spouts and beer lines are cleaned on a separate schedule – see our draught system guide for line cleaning intervals and daily tap hygiene.

FAQ

What is the best way to clean a copper beer tower?

Wipe it with a damp microfibre cloth after every shift and dry it with a second cloth. Polish with a copper and brass cream every 2–4 weeks if you want it shiny.

Why is my copper beer tower turning dark?

Copper and brass oxidise naturally and darken over time. It is not a defect. Polishing brings the shine back; washing with water only gives an even patina.

Can I use vinegar or descaler on copper?

No. Acids, descalers, chlorine and grill cleaners leave black stains on copper and brass. Use water and, if needed, a dedicated copper and brass polish.

More guides

Copper beer towers in this article
WhatsApp